Kinh nghiệm tối ưu và sử dụng Cehp trong môi trường thực tế

Kinh nghiệm tối ưu và sử dụng Cehp trong môi trường thực tế

Cần bao nhiêu Monitor, ODS, MDS?

http://ceph.com/presentations/201211...deployment.pdf

- 3 monitor
- Càng nhiều ODS càng tốt
- 1 MDS cho làm cache cấu trúc file hệ thống và để sử dụng tính năng CephFS for NAS storage từ Client
- Rados Gateway cần khi kết nối swits và S3 của Openstack, dùng để chuyển đổi các yêu cầu từ http qua ceph filesystem.



Eventually before going live you might like those little tips/best practices:

• Use a logical volume of 10G for the monitor directory (as recommend in the official documentation, see Data Storage section)
• SSD for write journal http://ceph.com/community/ceph-perfo...-ssd-journals/
• Increase the osdmax value
• Set “filestore flusher” option to false, in your [osd] section
• Set a number of PG-per-pool according to the calculation from the Ceph official documentation
• By default, each object is replicated 2 times, you might want to change this behavior to 3. This value can be changed later after the creation of the pool but it’s quite handy to set it as default. Put the following flag in the [mon] section of your ceph.conf: “osd pool default size = 3″
• Enable writeback cache mode on your disk controller, only if your controller is battery-backed
• Use XFS for the OSD filesystem with the following recommended options: noatime,nodiratime,logbsize=256k,logbufs=8,inode64
• CRUSH Rule and Cluster Map http://thenewstack.io/software-defin...rage-ceph-way/
  

https://ceph.com/user-story/ceph-from-poc-to-production/